Optical Amp Gain And Nf Measurement - YASKAWA AQ6370B User Manual

7.8

Optical Amp Gain and NF Measurement

Procedure
IM 735302-01E
Measurement can be performed of the optical amp gain and noise figure from the
measured waveform of the signal light going into the optical amp, and the measured
waveform of the output light leaving the optical amp.
1.
Press ANALYSIS. The soft key menu for analyzing measured waveforms
appears.
2.
Press the ANALYSIS 2 soft key. The analysis function selection menu is
displayed.
3.
Press the EDFA-NF soft key. Analysis is performed, and the results are displayed
in a list. The analysis results display screen is switched with the SWITCH
DISPLAY soft key.
Note
When zooming a waveform, if you click in the list of analysis results, the waveform of the
selected channel is displayed in the center of the waveform screen.
1
2
3
4
5
6
7
8
9
10
11
App
Index
7-19