Table of Contents
Advertisement
1.3 Panel keys and Knobs
1-4
MEMORY
The MEMORY key contains functions for writing the contents of the active trace to the
unit's internal memory. When you press the MEMORY key, the traces and memory list
screen (soft key menu) are displayed. A memory number may be entered in the DATA
ENTRY section, or selected using the rotary knob or arrow keys.
FILE
The FILE key contains functions for saving and loading waveform data, program data,
and the like to and from USB storage media (USB memory/HDD).
PROGRAM
The PROGRAM key contains the soft keys related to program functions for controlling
measurements through a program.
SYSTEM
The SYSTEM key contains system-related functions such as monochromator adjusting
optical alignment, wavelength adjustment, hardware setup, and setting initialization.
ADVANCE
The ADVANCE key contains functions related to template function settings.
USER
Frequently used soft keys can be registered on the soft key menu in the USER key.
Registering frequently used soft keys in the USER key allows you to execute frequently
used functions in a small number of steps.
COPY/FEED
The COPY key is used to output the measurement screen to the internal printer or a file.
When you press the COPY key, the measured waveforms and lists displayed on the
screen are output to the internal printer or a file.
The FEED key is used to feed printer paper. Paper feeding continues as long as you hold
down the FEED key.
UNDO/LOCAL
The key's function changes depending on the status of the instrument when the UNDO/
LOCAL key is pressed. The following table shows the key's functions.
Status of Instrument
UNDO action is allowed
During user key registration
During remote control by
external PC (Remote light is on)
HELP
When you press the HELP key, a soft key menu of the currently displayed screen is
displayed explanations.
Soft keys for selecting the "MORE INFO" which indicate additional information are
displayed by some soft keys in HELP screen.
Function
If the UNDO key is pressed after changing parameter
settings, changing or deleting data, etc., the previous
action (change, deletion, etc.) is canceled and the state
preceding that action is restored.
If the UNDO key is pressed during user key registration,
registration mode is canceled and the soft key menu
which appeared when the SYSTEM key was pressed is
displayed again.
Changes the state from the remote state back to the
local state. The remote light turns off.
IM 735302-01E
Advertisement
Table of Contents
