Table of Contents
Advertisement
Chapter 10
Maintenance
10.1 Upgrading the Firmware
Procedure
Preparing for Upgrade
Upgrading the Firmware
IM 735302-01E
Downloading the Firmware
Download the updating software from the Yokogawa Web site.
Save the downloaded software to a USB memory device.
http://www.yokogawa.co.jp/tm/
Removing the Ethernet Cable
Confirm that the instrument is not connected to a network. The upgrade cannot be
performed if connected to a network.
During the upgrade, do not manually turn the power OFF. The instrument may not
be able to start up again.
1.
Press SYSTEM. The menu regarding the system appears.
2.
Press the MORE 1/4 soft key to display MORE 4/4.
3.
Press the VERSION soft key. The software version is displayed.
4.
Press the UPDATE soft key. The message, "Insert Update Files" is displayed.
5.
Insert the USB memory device containing the updating software into the
instrument.
6.
Press the CONTINUE soft key. A list of updating software is displayed.
7.
The message, "Please remove USB storage device" is displayed. Remove the
USB memory.
CAUTION
1
2
3
4
5
6
7
8
9
10
11
App
Index
10-1
Advertisement
Table of Contents
