6.5.1 Serial Communication Settings
Set the printer RS-232 settings.
Menu
Setting
Baud Rate
Parity
Data Bits
Stop Bit(s)
6.5.2 Ethernet Settings
Configure your printer's Ethernet (wired) connection and check its status.
When the Ethernet is connected, the Ethernet icon and IP address are displayed on the LCD
as shown below.
Interface
Set the RS-232 Baud rate.
Set the RS-232 Parity.
Set the RS-232 Data bits.
Set the RS-232 Stop bits.
Baud Rate
Serial
Parity
Data Bits
Stop Bit(s)
Description
41
1200 bps
2400 bps
4800 bps
9600 bps
19200 bps
38400 bps
57600 bps
115200 bps
None
Odd
Even
7
8
1
2