6 ] Removing The Dc Motor Assy And Cutter Assy - Brother PT-2420PC Service Manual

[ 6 ] Removing the DC Motor ASSY and Cutter ASSY
(1) Remove the washer 2.6 and double gear 3 from the chassis sub ASSY.
(2) Remove the two screws to remove the DC motor ASSY from the chassis sub ASSY.
(3) Remove the one retaining ring to remove the cutter lever and cutter return spring from the
chassis sub ASSY.
(4) Remove the one screw to remove the cutter ASSY from the chassis sub ASSY.
Warning: When removing the cutter ASSY, take care not to get injured in your fingers with
(5) Remove the one retaining ring to remove the cutter rack gear and cutter drive gear ASSY
from the chassis sub ASSY.
Cutter drive gear ASSY
the cutter blade.
Cutter rack gear
Screw
Cutter ASSY
Cutter return spring
Washer 2.6
Fig. 3.1-10 Removing the DC Motor ASSY and Cutter ASSY
Retaining ring
III-7
Cutter lever
DC motor ASSY
Chassis sub ASSY
Screws
Double gear 3