Table of Contents
Advertisement
• Magnetic stripe write retry count setting
This command sets the number of times the device will retry to write to the magnetic stripe.
STX, 91h, 'W'/'w', magnetic stripe write retry count setting, ETX, BCC
Magnetic write retry count setting parameters
'0':
No retry
'1':
Sets the magnetic write retry count to 1 time.
'2':
Sets the magnetic write retry count to 2 times.
'3':
Sets the magnetic write retry count to 3 times.
'4':
Sets the magnetic write retry count to 4 times.
'5':
Sets the magnetic write retry count to 5 times.
'6':
Sets the magnetic write retry count to 6 times.
'7':
Sets the magnetic write retry count to 7 times.
The ex-factory magnetic write retry count setting is 2 times.
• Cleaning operation repeat count setting
This command sets the number of times to repeat the cleaning of the thermal head.
STX, 91h, 'U'/'u', cleaning count setting, ETX, BCC
Cleaning count setting parameters
'1':
Sets cleaning count to 1 time.
'2':
Sets cleaning count to 2 times.
'3':
Sets cleaning count to 3 times.
'4':
Sets cleaning count to 4 times.
'5':
Sets cleaning count to 5 times.
'6':
Sets cleaning count to 6 times.
'7':
Sets cleaning count to 7 times.
The ex-factory cleaning count setting is 3 times.
• Two-byte characters gap dot space setting (JP/HK/TW)
This command sets the two-byte characters gap dot space. Settings using the ESC sequence
(ESC, D) in the print text data string are enabled only in the command, but settings using this
command function as default settings.
64
Advertisement
Table of Contents
