Table of Contents
Advertisement
• ESC B/b
Specifies the line width of ANK characters.
ESC 'B'/"b" next parameter range: '0' to '2'
ESC "B0" Specifies normal narrow gothic fonts.
ESC "B1" Specifies enhanced gothic fonts.
ESC "B2" Specifies double-enhanced gothic fonts.
• ESC J/j
Sets double/single byte fonts as ANK characters.
ESC 'J'/"j" next parameter range: '0' to '1'
ESC "J0"
Specifies two-byte gothic fonts.
ESC "J1"
Specifies single-byte gothic fonts.
ANK character double-byte specifications are valid only on Japanese models.
• ESC F/f
Sets 24/16 dot fonts for AN characters.
ESC 'F/"f" next parameter range: '0' to '1'
ESC "F0"
Specifies 24 dot fonts.
ESC "F1"
Specifies 16 dot fonts.
16 dot fonts cannot be used on Japanese, Taiwanese or Hong Kong specification models.
1 digit configuration
1 digit configuration
1 digit configuration
28
Advertisement
Table of Contents
