Table of Contents
Advertisement
(4)
Card insertion wait status cancel command
This command cancels the card insertion wait status.
The state in which the device waits for a card to be inserted to the inlet, by the execution of the
magnetic stripe read command, magnetic stripe write command, the erase + print command,
the erase command or the card front/rear idle command is called the card insertion wait state,
but this command cancels the card insertion wait state.
This command can be executed while executing a command (priority command). When this
command is executed, the prior, executing command is cancelled.
Command Transfer Formats
STX
54h
Response Transfer Formats
STX
54h
(5)
Card removal wait status cancel command
This command makes a card in the device that is waiting removal a process targeted card.
A card that is executing the erase + print command, the erase command or the discharge
command becomes a card waiting removal by the user.
To reread the magnetic stripe data or to print again, either execute this command, or execute
the card rear side idle command or the card front side idle command to make it a process
targeted card.
Command Transfer Formats
STX
55h
Response Transfer Formats
STX
55h
ETX
57h
Status
ETX
ETX
56h
Status
ETX
BCC
BCC
50
Advertisement
Table of Contents
