Table of Contents
Advertisement
STX, 91h, 'D', two-byte character gap dot space setting, ETX, BCC
Two-byte character gap dot space setting parameters
'0':
Sets the two-byte character gap dot space setting to 0.
'1':
Sets the two-byte character gap dot space setting to 1.
:
:
'9':
Sets the two-byte character gap dot space setting to 9.
'A':
Sets the two-byte character gap dot space setting to 10.
'B':
Sets the two-byte character gap dot space setting to 11.
'C':
Sets the two-byte character gap dot space setting to 12.
'D':
Sets the two-byte character gap dot space setting to 13.
'E':
Sets the two-byte character gap dot space setting to 14.
'F':
Sets the two-byte character gap dot space setting to 15.
The ex-factory two-byte character gap dot space setting is 2 dots.
• Single-byte character gap dot space setting
This command sets the single-byte characters gap dot space.
sequence (ESC, d) in the print text data string are enabled only in the command, but settings
using this command function as default settings.
STX, 91h, 'd', single-byte character gap dot space setting, ETX, BCC
Single-byte character gap dot space setting parameters
'0':
Sets the singe-byte character gap dot space setting to 0.
'1':
Sets the singe-byte character gap dot space setting to 1.
:
:
'9':
Sets the singe-byte character gap dot space setting to 9.
'A':
Sets the singe-byte character gap dot space setting to 10.
'B':
Sets the singe-byte character gap dot space setting to 11.
'C':
Sets the singe-byte character gap dot space setting to 12.
'D':
Sets the singe-byte character gap dot space setting to 13.
'E':
Sets the singe-byte character gap dot space setting to 14.
'F':
Sets the singe-byte character gap dot space setting to 15.
The ex-factory singe-byte character gap dot space setting is 2 dots.
65
Settings using the ESC
Advertisement
Table of Contents
