Table of Contents
Advertisement
• ESC M/m
Sets the dot spaces between lines
ESC 'M'/"m" next parameter range: "0" to "F"
• ESC X/x
Sets the X coordinate to expand characters.
ESC 'X'/'x' next parameter range:
For vertical cards: "000"' to "319"
For horizontal cards: "000" to "479"
• ESC Y/y
Sets the Y coordinate to expand characters.
ESC 'Y'/"y" next parameter range:
For vertical cards: "000" to "479"
For horizontal cards: "000" to "319"
• ESC D
Sets the dot space for gaps in two-byte characters. Dot spaces are applied to the right side of
characters.
ESC 'D' next parameter range: '0' to 'F'
• ESC d
Sets the dot space for gaps in one-byte characters. Dot spaces are applied to the right side of
characters.
ESC 'd' next parameter range: '0' to 'F'
• ESC W/w
Sets the width size of characters to expand.
ESC 'W'/"w" next parameter range: '1' to '2'
ESC "W1"
Specifies normal width fonts.
ESC "W2"
Specifies double width fonts.
• ESC V/v
Sets the vertical size of characters to expand.
ESC 'V'/"v" next parameter range: '1' to '2'
ESC "V1" Specifies normal height fonts.
ESC "V2" Specifies double tall fonts.
1 digit configuration
3 digit configuration
3 digit configuration
3 digit configuration
3 digit configuration
1 digit configuration
1 digit configuration
1 digit configuration
1 digit configuration
27
Advertisement
Table of Contents
