Table of Contents
Advertisement
The following shows settings for a version (TCP310) having three tracks of magnetic heads.
'10' : Sets track 1 to JISX6302 recording method.
'11' : Sets track 1 to ISO781 1/2 first track recording method.
'12' : Sets track 1 to ISO781 1/2 second track recording method.
'13' : Sets track 1 to ISO781 1/2 third track recording method.
'20' : Sets track 2 to JISX6302 recording method.
'21' : Sets track 2 to ISO781 1/2 first track recording method.
'22' : Sets track 2 to ISO781 1/2 second track recording method.
'23' : Sets track 2 to ISO781 1/2 third track recording method.
'30' : Sets track 3 to JISX6302 recording method.
'31' : Sets track 3 to ISO781 1/2 first track recording method.
'32' : Sets track 3 to ISO781 1/2 second track recording method.
'33' : Sets track 3 to ISO781 1/2 third track recording method.
The ex-factory default setting for track 2 is '22.'
The following shows settings for a version (TCP300) having one track of a magnetic head.
'20' : Sets track 2 to JISX6302 recording method.
'21' : Sets track 2 to ISO781 1/2 first track recording method.
'22' : Sets track 2 to ISO781 1/2 second track recording method.
'23' : Sets track 2 to ISO781 1/2 third track recording method.
The ex-factory default setting for track 2 is '21.'
Also, for a 1 track version (TCP300), the first and third tracks cannot be set.
(4)
Media setting command
This command sets the media to be used. The setting made with this command remains in
effect until the power is turned off or the device is reset. After being reset, the EEPROM
setting value is initialized.
Important
If the media set for use does not correspond to the setting, it is possible that erasing or
printing will not work, or that problems such as writing to the magnetic stripe will not
work. Also, even if there is no problem in erasing, printing or writing to the magnetic
stripe, the life of the card will be shortened and the quality to magnetically write to the
card will decrease. Therefore, when using this command, check the characteristics of
the media to be used.
68
Advertisement
Table of Contents
