Table of Contents
Advertisement
(3)
Various setting commands
This command sets each of the default settings.
The setting is stored internally with the non-volatile memory, even when the power is cut.
When the power is turned on again, the stored contents are handled as the default parameters.
Important
There is a limit to the number of times the non-volatile memory can be used.
Issuing this command is limited to when starting up the system, and frequent use should
be avoided.
Command Transfer Formats
ETX
91h
Response Transfer Formats
STX
91h
Setting type Setting parameter
Status
ETX
ETX
BCC
60
BCC
Advertisement
Table of Contents
