Table of Contents
Advertisement
Type and Parameter List (Types are set alphabetic characters and parameter are set by
numerical values)
Contents
USB Serial Number
Serial port baud rate
setting
Initialize
USB serial number specification
This command sets the terminal individual number when using a USB interface. If the serial
number is a value between 1 and 127, the host COM number can be value unique to that
terminal.
The COM port varies with the port to use when the serial number is 0.
STX, 90h, 'U'/'u', 1 to 3 digit parameters, ETX, BCC
Parameters are described in three digit decimal values. 0 can be omitted.
The ex-factory default serial number is 0.
Baud rate setting
This command sets the baud rate when using a CMOS interface.
STX, 90H, 'B'/'b', parameter, ETX, BCC
Baud rate setting parameter
'0':
Sets the baud rate to 9600 bps.
'1':
Sets the baud rate to 4800 bps.
'2':
Sets the baud rate to 19200 bps.
'3':
Sets the baud rate to 38400 bps.
'4':
Sets the baud rate to 2400 BPS.
The ex-factory default setting is '0' (9600 bps).
Type
Parameters
'U' 'u'
'0' to '127'
'B' 'b'
'0' to '4'
'O' 'o'
'0'
59
Function
Serial number for USB
interface
CMOS interface baud rate
setting
Returns
device
ex-factory default settings.
Initial
Value
'0'
'0'
to
-
Advertisement
Table of Contents
