Table of Contents
Advertisement
(4)
Internal image data 1 expand command
(Contact our sales representative for destination country.)
This command expands images specified by an expansion image number from among the
image data stored in the reader/writer flash ROM1.
Image data is that which is expanded to the ROM1 image area. If within a capacity range, this
is data of a BMP file (bit map file) on a Windows system, that stores up to 2000 files.
A dedicated tool is required to store image data to the flash ROM1 memory. Contact our sales
representative.
Command Transfer Formats
STX
42h
Data
arrangement
specification
Response Transfer Formats
STX
42h
Parameter Explanation
• Data arrangement specification parameter
To specify whether to use the internal vertically or horizontally, select '0' to '3.'
'0':
Vertical card + overwrite
'1':
Horizontal card + overwrite
'2':
Vertical card + added writing (recommended)
'3':
Horizontal card + added writing (recommended)
These four parameters specify how to write.
• ','
Required to separate parameters.
• Data arrangement X coordinate parameter
Specifies the X coordinate on the upper left edge of the image to expand.
When the data arrangement specification is '0,' '2': '0' to "319"
When the data arrangement specification is '1,' '3': '0' to "479"
• Data arrangement Y coordinate parameter
Specifies the Y coordinate on the upper left edge of the image to expand.
When the data arrangement specification is '0,' '2': '0' to "479"
When the data arrangement specification is '1,' '3': '0' to "319"
','
Data
arrangement
X coordinate
Status
ETX
','
Data
','
Expansion
arrangement
Y coordinate
BCC
29
ETX
image
specification
number
BCC
Advertisement
Table of Contents
