Oce VarioPrint 4110 User Manual page 205

Product safety data sheet of the Océ finisher
[118]
PRODUCT SAFETY DATA SHEET
Model
Description
Process speed
Dimensions
Weight
Voltage
Frequency
Current-rated
Building fuse
Power consumption, ready
Power consumption, operation
Mains connection
Safety class
Protection class
Sound pressure level
(at operator position)
Sound power level
Radio interference
Heat emission
Ozone emission
Dust emission
Room volume
Room ventilation
Use simulation at random
operation
Consumables
Additional safety information
CE-Compliance
Copyright © 2006 Océ-Technologies B.V., Venlo, NL
The content of this safety data sheet is subject to the disclaimer of liability on the
introduction page of this chapter. You can find the translations of the disclaimer in
the Safety data sheets section of the respective languages in this multilingual Safety
information.
Océ Set Finisher
High volume finishing device.
Full productive with printer/multi-functional device.
Width 1153 mm
Depth 696 mm
Height 815 mm
130 kg
200-240 V
50-60 Hz
1 A
16 A
35 W
74 W
Cable with plug connected at printing engine
I (IEC 61140) Protective earth connection
IP 20 (IEC 60529)
S a t n d b y
See safety data sheet of printer/multi-functional device.
See safety data sheet of printer/multi-functional device.
Complies with Directive 2004/108/EC and FCC rules and regulations, part 15 Class A.
Ready 58 W; in operation 92 W
none
See safety data sheet of printer/multi-functional device.
See safety data sheet of printer/multi-functional device.
See safety data sheet of printer/multi-functional device.
not applicable
none
none
Approved according to Approved according to
Low Voltage Directive EMC Directive
2006/95/EC 2004/108/EC
Number
Date September 2008
n I o p r e t a o i n
Approved according to standard
UL 60950-1 and
CAN/CSA-C22.2 NO. 60950-1-03
INFORMATION
TECHNOLOGY
EQUIPMENT
E 69871
Safety data sheets
EN-816-c-UK
205