Oce VarioPrint 4110 User Manual page 187

Hide thumbs Also See for VarioPrint 4110:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Error handling
[104]
[104] Paper jams at location A1
Caution
Never open the doors when the machine is running, because when you access the
paper path inside the system, you may touch some moving parts. Only open the
doors when an according message on the operator panel asks you to do so.
When you remove jammed paper at A1 you may accidentally touch the slowly
rotating rubber wheels. This is not dangerous but, unnoticed, may come as a
surprise.
When the machine is running, do not touch the copy exit slit when you remove
sheets from the output trays of the finisher.
General
Always use materials recommended by Océ and developed for this machine.
Materials not approved by Océ may result in faults in your machine.
Do not use the machine when it is emitting unusual sounds. Remove the plug
from the power socket or switch off the fixed connection to the electricity grid
and contact Océ Customer Service.
This machine is equipped with an ozone filter. The life of the ozone filter is equal
to the life of the machine. Therefore, the ozone filter does not need to be replaced.
Additional information for the USA
The machine produces ozone during the operation. At normal use, the ozone
emission is so low that the ozone concentration is limited to a safe value (below the
Threshold Limit Value for ozone: 0.1 ppm or 0.2 mg/m
installed in a room that has a volume of minimum 50 m
odour inconvenience when the machine operates continuously for a long time, it is
recommended to ensure that there is sufficient room ventilation.
Instructions for safe use
3
) when the machine is
3
. However, to prevent ozone
187

Advertisement

Table of Contents
loading

This manual is also suitable for:

Varioprint 4120

Table of Contents