Epa Energy Star - Oce VarioPrint 4110 User Manual

®

EPA ENERGY STAR

EPA ENERGY STAR
Introduction
Océ-Technologies B.V. has joined the Energy Star
Environmental Protection Agency (EPA). The purpose of the Energy Star
is to promote the manufacturing and marketing of energy-efficient equipment,
thereby potentially reducing combustion-related pollution.
Using the energy management features outlined below prevents unnecessary power
consumption, which helps to prevent air pollution from electricity generating plants
and saves money on your utility bills.
As an Energy Star
VarioPrint
down in the Energy Star Program Requirements for Imaging Equipment (Version
1.0).
Energy consumption
The energy consumption of Imaging Equipment can be determined by means of the
TEC procedure. This procedure was developed under the auspices of the United
States Environmental Protection Agency. TEC stands for Typical Electricity
Consumption. The TEC value of a product represents the energy consumed in a
week under standardized conditions. For the Océ VarioPrint
value is listed in the Product Safety Data Sheet included in this manual.
Power Modes and Delay Times
Energy consumption and efficiency are influenced both by the product technology
and by the settings chosen by the user, especially the delay times that are selected to
enter reduced power states. The following delay times are preset.
[18]
[18] Preset delay times
Operating mode
Low power mode
Sleep mode
Off mode
The modes above are automatically entered after the default delay time has elapsed,
counting from the moment the last print has been produced. These settings are
recommended and for most users ensure both ease of use and low energy
196 Chapter 18 Safety information (US)
®
®
Partner, Océ-Technologies B.V. has determined that the Océ
®
4110/4120 meets the Energy Star
Default Delay Time [minutes]
15 (possible range: 1–240 minutes)
60 (possible range: 1–240 minutes)
Press the power switch
®
Program of the United States
®
criteria for energy efficiency laid
®
4110/4120 the TEC
®
Program