Oce VarioPrint 4110 User Manual page 197

consumption. The values between brackets are the minimum and maximum values.
The key operator can change the delay times.
Shorter delay times within this range will lower the energy consumption even
further, but can cause longer recovery times.
In some cases, longer delay times can prove to be more convenient, but it should be
noted that longer delay times can cause an increase in energy consumption.
Therefore, from an energy preservation point of view, longer delay times are not
recommended.
Standby power (Federal Energy Management Program)
Note: After shutting down all systems properly, the standby mode as defined by
FEMP, is reached by putting the power switch
[111]
This product meets the following criteria for the United States Federal Energy
Management Program (FEMP):
In standby mode, this product consumes less than 1 W.
This product meets the EPA ENERGY STAR
[112]
Automatic duplex
Using both sides of paper reduces paper costs, national energy consumption and the
amount of paper in the waste disposal process. Therefore, the Océ VarioPrint
4110/4120 is by default set to automatic duplex printing.
EPA ENERGY STAR
in the "O" position.
®
guidelines for energy efficiency.
®
®
197