Disassembly - Nokia NSE-6 SERIES Service Manual

PAMS
Technical Documentation

Disassembly

Remove battery
Remove a–cover
screws (2 pcs)
Step 1. Push c–cover edge outwards to re-
lease it behind locking snap
Step 2. Lift up the edge to release c–cover.
Step 3. Repeat the operation on both sides.
Original 08/98
Disassembly & Troubleshooting Instructions
NOTE: When assembling the
screws, use 17 Ncm torque.
Step 1. Open slide cover.
Step 2. Push slide edge outwards.
Step 3. Lift slide up from the edge
and slide will be released.
Turn the phone around and re-
move C–cover screws (2 pcs)
Remove c–cover by
lifting up rear and
pulling cover out.
NSE–6
Page 3