PAMS
Technical Documentation
Flash button (ALT+L):
Load Ppm button (ALT+P):
LPT Port list box:
HW dep. files check box (disabled):
Close button (ESC):
Original 08/98
Starts flashing of selected file to phone. Before flashing dialog
asks, does user want to save SCM & User settings to file (and
load them after flashing).
Opens Open File dialog, with which user can select a PPM
package file to be flashed to ME. If user selects OK button, the
name of selected file is copied to PPM Image edit field. Usually
user should use Market Area to select correct PPM package.
User can select parallel port to be used when flashed.
Closes the dialog box and does not start flashing.
NSE/M–1/3/6
Service Software Instructions
Page 71