Disassembly Instructions (Also See The Video Clips On Care Point) - Nokia 3100 Service Manual

nokia
C P
ONNECTING EOPLE
NMP/CMO Sales and Marketing Customer Care EMEA
Technical Services, Repair Concepts

8. DISASSEMBLY INSTRUCTIONS (ALSO SEE THE VIDEO CLIPS ON CARE POINT)

If not already done protect window with a film to
avoid dust and scratches.
Remove A-Cover as shown in the picture.
Separate the module from the B-Cover and unplug the
display connector carefully by removing UI-Shield from
PWB.
Use the SRT-6 to remove the LCD from the UI-Shield.
Prevent the Key Dome tape from getting dirty.
Service Manual 3100/3120 Level 1&2
PAGE 11 (20)
CONFIDENTIAL
Press the Release Button before removing the C-Cover.
Unscrew the six Torx Plus
assembly, the reverse order and a Torx Plus
with a torque of 20Ncm have to be used.
Separate UI-Shield from PWB carefully. Key Dome is
attached with adhesive tape, which must not be
touched.
Always protect LCD window with a protection film to
avoid dust and scratches.
Copyright 2003-2004 © Nokia Corporation
Approved 2.0
DJk
23.09.2004
size 6 screws. For
®
driver
®