Phone Identity - Nokia NSE-6 SERIES Service Manual

PAMS
Technical Documentation
Phone Identity... command
Activation
Alt, V,P
Command opens Phone Identity Information dialog, which shows iden-
tification information. Information is shown in a modeless dialog which
may be left open during other operations. It is also updated when ever
needed.
The After Sales Software has an initialisation file which has extension
.INI. Initialisation file is TESLA.INI which includes all next selections (on
mentioned menus or dialogs) and parameters:
•
•
Original 08/98
Status Bar Text
View Phone Identity.
RF Controls dialog ([NSB/E/K–3RF])
Active Unit (Active Unit=)
TX Power Level (TX Power Level=)
Operation Mode (Operation Mode=)
TX Data Type (TX Data Type=)
Continuous Mode Channel (Cont Mode Channel=)
Channel (Channel=)
Monitoring Channel 1 (MonitoringChannel=)
AGC dB value (AGC=)
AGC Absolute Value (AGCAbsolute=)
Front End (FrontEnd=)
Call Simulation dialog ([NSB/E/K–3CALLSIM])
Monitoring Channel 2 (Monitoring Channel 2 =)
Monitoring Channel 3 (Monitoring Channel 3 =)
Monitoring Channel 4 (Monitoring Channel 4 =)
NSE/M–1/3/6
Service Software Instructions
Page 73