Table of Contents
Advertisement
nokia
C
P
ONNECTING
EOPLE
CMO Operations & Logistics
Training and Vendor Development
Multimedia Creation & Support
9. DISASSEMBLY INSTRUCTIONS
1.) Needed tools for disassembly and assembly.
3.) Press the Release Button and remove the B-Cover.
5.) Remove the A-Cover.
of the device when re-assembling the A-Cover.
For Nokia 1112 assembly only!
7.) Fit the Keymat to the A-Cover, paying attention to
its correct position.
Service Manual 1112 RM-92/93 Level 1&2
Always start on the top side
PAGE 12 (18)
Confidential
2.) Protect the window with a film.
4.) Use the SRT-6 to unlock the A-Cover on both sides.
6.) Use SRT-6 to remove the Keymat and protect the
inner side of the window with a film.
8.) Unscrew the six, Torx Plus
shown order.
For assembly, use the reverse order and
a Torx Plus
size 6 driver with a torque setting of
®
24Ncm.
Copyright © 2006 NOKIA Corporation. All rights reserved.
Approved 3.0
MGR
03.Jul.2006
size 6 screws in the
®
Advertisement
Table of Contents
