Nokia NSE-6 SERIES Service Manual page 169

PAMS
Technical Documentation
Set UI/DEV Default Values... command
Activation
Alt, D,V
After selection application asks confirmation: "Are you sure you want to
set UI/DEV to factory settings?". If Yes is answered, default settings are
resetted to phone.
Restore User Defaults... command
Activation
Alt, D,R
This command is used to restore Default User Settings, if they have de-
generated. Dialog may be opened from menu, or is opened automatically,
when loading or saving user settings fails or is skipped during flashing
(see Flash Phone... command). The dialog is also opened after full facto-
ry set.
Default settings are loaded from files in product specific subdirectory of
WinTesla directory e.g. for NSE–3 this directory could be c:\wintes-
la\nse–3 . Into these directories user should unpack all flash packages.
Market areas and corresponding files are described in INI–file in product
specific subdirectory e.g. for NSE–3 this file would be c:\wintes-
la\nse–3\nse–3.ini . INI–file is common to all flash packages, but market
areas are added to Market Area list, when new flash packages are un-
packed to product specific subdirectory.
Selecting Restore User Defaults opens following Restore Default User
Settings dialog.
NOTE: This is a screen example. Actually enabled settings may differ.
Dialog mode: modal
Restore Default User Settings dialog box has following items:
Original 08/98
Status Bar Text
Reset phone to UI and SCM factory settings
Status Bar Text
Open Restore Default User Settings.
NSE/M–1/3/6
Service Software Instructions
Page 67