Ssh Timeout - Cisco CRS User Manual

ssh timeout

ssh timeout
To configure the timeout value for authentication, authorization, and accounting (AAA) user authentication,
use the ssh timeout command. To set the timeout value to the default time, use the no form of this command.
ssh timeout seconds
no ssh timeout seconds
Syntax Description
seconds
Command Default
seconds: 30
Command Modes
Global configuration
Command History
Release
Release 2.0
Usage Guidelines
Use the ssh timeout command to configure the timeout value for user authentication to AAA. If the user fails
to authenticate itself within the configured time to AAA, the connection is aborted. If no value is configured,
the default value of 30 seconds is used.
Task ID
Task ID
crypto
Examples In the following example, the timeout value for AAA user authentication is set to 60 seconds:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# ssh timeout 60
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
286
Time period (in seconds) for user authentication. The range is from 5 to 120.
Modification
This command was introduced.
Operations
read, write
Secure Shell Commands
OL-24740-01