Ssh Timeout - Cisco NCS 5000 Series Manual

Secure Shell Commands

ssh timeout

To configure the timeout value for authentication, authorization, and accounting (AAA) user authentication,
use the ssh timeout command. To set the timeout value to the default time, use the no form of this command.
ssh timeout seconds
no ssh timeout seconds
Syntax Description
seconds
Command Default
seconds: 30
Command Modes
XR Config mode
Command History
Release
Release 6.0
Usage Guidelines
Use the ssh timeout command to configure the timeout value for user authentication to AAA. If the user fails
to authenticate itself within the configured time to AAA, the connection is aborted. If no value is configured,
the default value of 30 seconds is used.
Task ID
Task ID
crypto
Examples In the following example, the timeout value for AAA user authentication is set to 60 seconds:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# ssh timeout 60
Time period (in seconds) for user authentication. The range is from 5 to 120.
Operations
read, write
System Security Command Reference for Cisco NCS 5000 Series Routers
ssh timeout
Modification
This command was introduced.
177