Rsakeypair - Cisco CRS User Manual

Public Key Infrastructure Commands

rsakeypair

To specify a named Rivest, Shamir, and Adelman (RSA) key pair for this trustpoint, use the rsakeypair
command in trustpoint configuration mode. To reset the RSA key pair to the default, use the no form of this
command.
rsakeypair keypair-label
no rsakeypair keypair-label
Syntax Description
keypair-label
Command Default
If the RSA key pair is not specified, the default RSA key is used for this trustpoint.
Command Modes
Trustpoint configuration
Command History
Release
Release 2.0
Usage Guidelines
Use the rsakeypair command to specify a named RSA key pair generated using the crypto key generate rsa
command for this trustpoint.
Task ID
Task ID
crypto
Examples
The following example shows how to specify the named RSA key pair key1 for the trustpoint myca:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# crypto ca trustpoint myca
RP/0/RP0/CPU0:router(config-trustp)# rsakeypair key1
Related Commands
Command
crypto key generate rsa, on page 199
OL-24740-01
RSA key pair label that names the RSA key pairs.
Modification
This command was introduced.
Operations
read, write
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
Description
Generates RSA key pairs.
rsakeypair
217