Send-Lifetime - Cisco CRS User Manual

send-lifetime

send-lifetime
To send the valid key and to authenticate information from the local host to the peer, use the send-lifetime
command in keychain-key configuration mode. To disable this feature, use the no form of this command.
send-lifetime start-time [duration duration value| infinite| end-time]
no send-lifetime start-time [duration duration value| infinite| end-time]
Syntax Description
start-time
duration duration value
infinite
end-time
Command Default
No default behavior or values
Command Modes
Keychain-key configuration
Command History
Release
Release 3.3.0
Release 3.6.0
Usage Guidelines
Task ID
Task ID
system
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
156
Start time, in hh:mm:ss day month year format, in which the key becomes valid.
The range is from 0:0:0 to 23:59:59.
The range for the number of days of the month to start is from 1 to 31.
The range for the years is from 1993 to 2035.
(Optional) Determines the lifetime of the key in seconds.
(Optional) Specifies that the key never expires once it becomes valid.
(Optional) Time, in hh:mm:ss day month year format, after which the key expires.
The range is from 0:0:0 to 23:59:59
Modification
This command was introduced.
The range values were added for the start-time argument.
Operations
read, write
Keychain Management Commands
OL-24740-01