Retransmit (Radius) - Cisco CRS User Manual

Authentication, Authorization, and Accounting Commands

retransmit (RADIUS)

To specify the number of times a RADIUS request is resent to a server if the server is not responding or is
responding slowly, use the retransmit command in RADIUS server-group private configuration mode.
retransmit retries
no retransmit retries
Syntax Description
retries
Command Default
The default value is 3.
Command Modes
RADIUS server-group private configuration
Command History
Release
Release 3.4.0
Usage Guidelines
Task ID
Task ID
aaa
Examples The following example shows how to set the retransmit value:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# aaa group server radius group1
RP/0/RP0/CPU0:router(config-sg-radius)# server-private 10.1.1.1 auth-port 300
RP/0/RP0/CPU0:router(config-sg-radius-private)# retransmit 100
Related Commands
Command
aaa group server tacacs+, on page 22
OL-24740-01
The retries argument specifies the retransmit value. The range is from 1 to 100. If no
retransmit value is specified, the global value is used.
Modification
This command was introduced.
Operations
read, write
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
Description
Groups different RADIUS server hosts into distinct
lists.
retransmit (RADIUS)
57