Tunnel Dfbit Disable (Ip) - Cisco CRS User Manual

tunnel dfbit disable (IP)

tunnel dfbit disable (IP)
To allow fragmentation by configuring the DF bit setting in the tunnel transport header, use the tunnel dfbit
disable command in the interface configuration mode. To return to the default DF bit setting, use the no form
of this command.
tunnel dfbit disable
no tunnel dfbit disable
Syntax Description
This command has no keywords or arguments.
Command Default
The tunnel transport header is encapsulated with the DF bit set.
Command Modes
Interface configuration
Command History
Release
Release 3.9.0
Usage Guidelines
Task ID
Task ID
tunnel
interface
Examples The following example shows how to set the encapsulation mode of the tunnel interface:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# interface tunnel-ip 1
RP/0/RP0/CPU0:router(config-if)# tunnel dfbit disable
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
144
Modification
This command was introduced.
Operations
read, write
read, write
IPSec Commands
OL-24740-01