Control-Plane - Cisco CRS User Manual

Management Plane Protection Commands

control-plane

To enter the control plane configuration mode, use the control-plane command. To disable all the
configurations under control plane mode, use the no form of this command.
control-plane
no control-plane
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
Global configuration mode
Command History
Release
Release 3.5.0
Usage Guidelines
Use the control-plane command to enter control plane configuration mode.
Task ID
Task ID
system
Examples
The following example shows how to enter control plane configuration mode using the control-plane
command:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# control-plane
RP/0/RP0/CPU0:router(config-ctrl)#
Related Commands
Command
management-plane, on page 174
OL-24740-01
Modification
This command was introduced.
Operations
read, write
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
Description
Configures management plane protection to allow
and disallow protocols.
control-plane
169