Show Key Chain - Cisco CRS User Manual

show key chain

show key chain
To display the keychain, use the show key chain command.
show key chain key-chain-name
Syntax Description
key-chain-name
Command Default
If the command is used without any parameters, then it lists out all the key chains.
Command Modes
EXEC
Command History
Release
Release 3.3.0
Usage Guidelines
Task ID
Task ID
system
Examples When a secure key storage becomes available, it is desirable for keychain management to alternatively prompt
you for a master password and display the key label after decryption. The following example displays only
the encrypted key label for the show key chain command:
RP/0/RP0/CPU0:router# show key chain isis-keys
Key-chain: isis-keys/ -
accept-tolerance -- infinite
Key 8 -- text "8"
cryptographic-algorithm -- MD5
Send lifetime:
Accept lifetime: 01:00:00, 29 Jun 2006 - Always valid [Valid now]
Related Commands
Command
accept-lifetime, on page 146
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
158
Names of the keys in the specified keychain. The maximum number of
characters is 32.
Modification
This command was introduced.
01:00:00, 29 Jun 2006 - Always valid
Keychain Management Commands
Operations
read
[Valid now]
Description
Accepts the valid key.
OL-24740-01