Ssh Client Vrf - Cisco CRS User Manual

ssh client vrf

ssh client vrf
To configure a new VRF for use by the SSH client, use the ssh client vrf command. To remove the specified
VRF, use the no form of this command.
ssh client vrf vrf-name
no ssh client vrf vrf-name
Syntax Description
vrf-name
Command Default
None
Command Modes
Global configuration
Command History
Release
Release 3.8.0
Usage Guidelines
An SSH client can have only one VRF.
If a specific VRF is not configured for the SSH client, the default VRF is assumed when applying other SSH
client-related commands, such as
274.
Task ID
Task ID
crypto
Examples The following example shows the SSH client being configured to start with the specified VRF:
RP/0/RP0/CPU0:router#
RP/0/RP0/CPU0:router(config)#
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
276
Specifies the name of the VRF to be used by the SSH client.
Modification
This command was introduced.
ssh client knownhost, on page 272
Operations
read, write
configure
ssh client vrf green
Secure Shell Commands
or ssh client source-interface, on page
OL-24740-01