IPSec Commands
tunnel ttl (IP)
To configure the time-to-live (TTL) value for the packets entering the tunnel, use the tunnel ttl command in
the interface configuration mode. To return to the default TTL value, use the no form of this command.
tunnel ttl ttl number
no tunnel ttl
Syntax Description
ttl number
Command Default
The default value is 255.
Command Modes
Interface configuration
Command History
Release
Release 3.9.0
Usage Guidelines
Task ID
Task ID
tunnel
interface
Examples
The following example shows how to set the encapsulation mode of the tunnel interface:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# interface tunnel-ip 1
RP/0/RP0/CPU0:router(config-if)# tunnel ttl 100
OL-24740-01
TTL value in numbers. Range is from 1 to 255
Modification
This command was introduced.
Operations
read, write
read, write
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
tunnel ttl (IP)
143