Cisco CRS User Manual page 120

taskgroup
Usage Guidelines
Task groups are configured with a set of task IDs for each action type. Deleting a task group that is still
referenced in the system results in a warning and rejection of the deletion.
From global configuration mode, you can display all the configured task groups. However, you cannot display
all the configured task groups in taskgroup configuration mode.
Entering the taskgroup command with no keywords or arguments enters task group configuration mode, in
which you can use the description, inherit, show, and task commands.
Task ID
Task ID
aaa
Examples The following example assigns read bgp permission to the task group named alpha:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# taskgroup alpha
RP/0/RP0/CPU0:router(config-tg)# task read bgp
Related Commands
Command
description (AAA), on page 30
task, on page 107
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
110
Authentication, Authorization, and Accounting Commands
Operations
read, write
Description
Creates a task group description in task configuration
mode.
Adds a task ID to a task group.
OL-24740-01