Cisco CRS User Manual page 43

Authentication, Authorization, and Accounting Commands
If the group command is used in administration configuration mode, only root-system and cisco-support
keywords can be specified.
Task ID
Task ID
aaa
Examples
The following example shows how to assign the user group operator to the user named user1:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# username user1
RP/0/RP0/CPU0:router(config-un)# group operator
Related Commands
Command
password (AAA), on page 44
usergroup, on page 117
username, on page 119
OL-24740-01
Operations
read, write
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
Description
Creates a login password for a user.
Configures a user group and associates it with a set
of task groups.
Accesses username configuration mode, configures
a new user with a username, and establishes a
password and permissions for that user.
group (AAA)
33