Tunnel Tos (Ip) - Cisco CRS User Manual

tunnel tos (IP)

tunnel tos (IP)
To specify a TOS value in the tunnel encapsulating packet, use the tunnel tos command in the interface
configuration mode. To return to the default TOS value, use the no form of this command.
tunnel tos tos number
no tunnel tos
Syntax Description
tos number
Command Default
The system copies the TOS and COS bits of the internal IP header to the GRE IP header.
Command Modes
Interface configuration
Command History
Release
Release 3.9.0
Usage Guidelines
Task ID
Task ID
tunnel
interface
Examples The following example shows how to set the encapsulation mode of the tunnel interface:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# interface tunnel-ip 1
RP/0/RP0/CPU0:router(config-if)# tunnel tos 134
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
142
TOS value in numbers. Range is from 0 to 255
Modification
This command was introduced.
Operations
read, write
read, write
IPSec Commands
OL-24740-01