Sam Delete Certificate - Cisco CRS User Manual

sam delete certificate

sam delete certificate
To delete a certificate from the certificate table, use the sam delete certificate command.
sam delete certificate location certificate-index
Syntax Description
location
certificate-index
Command Default
None
Command Modes
EXEC
Command History
Release
Release 2.0
Usage Guidelines
For security reasons, the sam delete certificate command can be issued only from the console port of the
networking device; the command cannot be issued from a Telnet connection to any other interface on the
networking device.
Use the show sam certificate summary command to display certificates by their index numbers.
Because the certificate authority (CA) certificate must not be unknowingly deleted, the Software Authentication
Manager (SAM) prompts the user for confirmation when an attempt is made to delete the CA certificate.
If a certificate stored on the system is no longer valid (for example, if the certificate has expired), you can use
the sam delete certificate command to remove the certificate from the list.
Task ID
Task ID
crypto
Examples The following example shows how to delete the certificate identified by the index number 2 from the memory
location:
RP/0/RP0/CPU0:router# sam delete certificate mem 2
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
236
Storage site of the certificate. Use one of the following: root, mem, disk0,
disk1, or other flash device name on the router.
Number in the range from 1 to 65000.
Modification
This command was introduced.
Operations
execute
Software Authentication Manager Commands
OL-24740-01