Timeout (Radius) - Cisco CRS User Manual

Authentication, Authorization, and Accounting Commands

timeout (RADIUS)

To specify the number of seconds the router waits for the RADIUS server to reply before retransmitting, use
the timeout command in RADIUS server-group private configuration mode. To disable this command and
return to the default timeout value of 5 seconds, use the no form of this command.
timeout seconds
no timeout seconds
Syntax Description
seconds
Command Default
seconds: 5
Command Modes
RADIUS server-group private configuration
Command History
Release
Release 3.4.0
Usage Guidelines
Task ID
Task ID
aaa
Examples The following example shows how to set the number of seconds for the timeout value:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# aaa group server radius group1
RP/0/RP0/CPU0:router(config-sg-radius)# server-private 10.1.1.1 auth-port 300
RP/0/RP0/CPU0:router(config-sg-radius-private)# timeout 500
Related Commands
Command
aaa group server tacacs+, on page 22
OL-24740-01
Timeout value (in seconds). The range is from 1 to 1000. If no timeout is specified,
the global value is used.
Modification
This command was introduced.
Operations
read, write
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
Description
Groups different RADIUS server hosts into distinct
lists.
timeout (RADIUS)
111