Cisco CRS User Manual page 57

Authentication, Authorization, and Accounting Commands
Examples
The following example shows how to establish the time for the dead-criteria conditions for a RADIUS server
to be marked as dead for the radius-server dead-criteria time command:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# radius-server dead-criteria time 5
Related Commands
Command
radius-server dead-criteria tries, on page 48
radius-server deadtime , on page 50
show radius dead-criteria, on page 84
OL-24740-01
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
radius-server dead-criteria time
Description
Specifies the number of consecutive timeouts that
must occur on the router before the RADIUS server
is marked as dead.
Defines the length of time, in minutes, for a RADIUS
server to remain marked dead.
Displays information for the dead-server detection
criteria.
47