Cisco CRS User Manual page 87

Authentication, Authorization, and Accounting Commands
Accounting:
This table describes the significant fields shown in the display.
Table 2: show radius Field Descriptions
Field
Server
Timeout
Retransmit limit
Related Commands
Command
vrf (RADIUS), on page 125
radius-server retransmit , on page 52
radius-server timeout , on page 54
OL-24740-01
0 requests, 0 pending, 0 retransmits
0 accepts, 0 rejects, 0 challenges
0 timeouts, 0 bad responses, 0 bad authenticators
0 unknown types, 0 dropped, 0 ms latest rtt
0 requests, 0 pending, 0 retransmits
0 responses, 0 timeouts, 0 bad responses
0 bad authenticators, 0 unknown types, 0 dropped
0 ms latest rtt
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
Description
Server IP address/UDP destination port for
authentication requests/UDP destination port for
accounting requests.
Number of seconds the router waits for a server host
to reply before timing out.
Number of times the Cisco IOS XR software searches
the list of RADIUS server hosts before giving up.
Description
Configures the Virtual Private Network (VPN) routing
and forwarding (VRF) reference of an AAA RADIUS
server group.
Specifies how many times Cisco IOS XR software
searches the list of RADIUS server hosts before
giving up.
Sets the interval for which a router waits for a server
host to reply.
show radius
77