Show Radius Authentication - Cisco CRS User Manual

show radius authentication

show radius authentication
To obtain information and detailed statistics for the RADIUS authentication server and port, use the show
radius authentication command.
show radius authentication
Syntax Description
This command has no keywords or arguments.
Command Default
If no RADIUS servers are configured on the router, the output is empty. If the default values are for the counter
(for example, request and pending), the values are all zero because the RADIUS server was just defined and
not used yet.
Command Modes
EXEC
Command History
Release
Release 3.3.0
Usage Guidelines
Task ID
Task ID
aaa
Examples
The following sample output is for the show radius authentication command:
RP/0/RP0/CPU0:router# show radius authentication
Server: 12.26.25.61, port: 1812
0 requests, 0 pending, 0 retransmits
0 accepts, 0 rejects, 0 challenges
0 timeouts, 0 bad responses, 0 bad authenticators
0 unknown types, 0 dropped, 0 ms latest rtt
Server: 12.26.49.12, port: 1812
0 requests, 0 pending, 0 retransmits
0 accepts, 0 rejects, 0 challenges
0 timeouts, 0 bad responses, 0 bad authenticators
0 unknown types, 0 dropped, 0 ms latest rtt
Server: 12.38.28.18, port: 21099
0 requests, 0 pending, 0 retransmits
0 accepts, 0 rejects, 0 challenges
0 timeouts, 0 bad responses, 0 bad authenticators
0 unknown types, 0 dropped, 0 ms latest rtt
Cisco IOS XR System Security Command Reference for the Cisco CRS Router, Release 4.1
80
Authentication, Authorization, and Accounting Commands
Modification
This command was introduced.
Operations
read
OL-24740-01