Delete Test Access Points; Test Access Configurations - Cisco ONS 15454 Reference Manual

Ons sonet tl1
Hide thumbs Also See for ONS 15454:
Table of Contents

Advertisement

Chapter 2
Procedures and Provisioning
The command in
Example 2-11
This command generates a REPT DBCHG message.
Note
Error codes supported:
SADC—Already disconnected
SRTN—Unable to release TAP

2.2.7 Delete Test Access Points

The command in
Example 2-12 ED-<STS_PATH>:[<[TID>]:<AID>:<CTAG>:::TACC=0:;
The TACC number must be set to zero in order to delete a TAP.
Note
If a TAP is not removed the STS bandwidth will be stranded.
Note

2.2.8 Test Access Configurations

Figure 2-3
E
Example 2-11
disconnects TAP 1 from the circuit/cross-connect under test.
DISC-TACC::1:12;
DV9-99 1970-01-02 02:59:43
M 12 COMPLD
;
Example 2-12
deletes a TAP.
Single Node View (Node 1)
F
RTU
Test Set
2.2.7 Delete Test Access Points
Cisco ONS SONET TL1 Command Guide, R6.0
2-13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ons 15310-clOns 15600Ons 15327

Table of Contents