Manually Renewing The Id Certificate; Manually Renewing The License - Cisco CSR 1000v Series Software Configuration Manual

Installing Cisco CSR 1000v Licenses
DETAILED STEPS
Command or Action
Step 1
configure terminal
Step 2
platform broadband {1K | 2K | 3K | 4K}
Example:
Router(config)# platform broadband 1K

Manually Renewing the ID Certificate

By default, the ID certificate is automatically renewed every 6 months. You can manually renew the ID
certificate using this procedure.
This may be useful in either of the following circumstances:
• If you have a limited window of Internet access
• After making licensing changes in the Smart Software Manager
SUMMARY STEPS
1. license smart renew id
DETAILED STEPS
Command or Action
Step 1 license smart renew id
Example:
Router# license smart renew id

Manually Renewing the License

By default, the license (also called "entitlement") is automatically renewed every 30 days. You can manually
renew the license using this procedure.
This may be useful in either of the following circumstances:
• Only a limited window of Internet access is available.
Purpose
Enter config mode.
Adds support for the number of broadband sessions to accommodate the
added broadband feature license(s).
You can add 1000 sessions for each broadband feature license you are
planning to install. For example, if you plan to add two broadband feature
licenses, enter the value as 2K.
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
Manually Renewing the ID Certificate
Purpose
Renews the ID certificate.
183