Edit Ecr Data; Overview - Sam4s SPS-500 Series Reference Manual

Edit ECR Data

Overview

SPS-500 programs can be edited at SAM500 and then downloaded to the ECR.
Choose P-Mode Programming or S-Mode from the Edit ECR Data menu and then select a
specific item to modify that part of an existing SAM4s SPS-500 program. Remember that the
options in this program allow you to edit the same program options that you set on a
standalone SPS-500 through the register's keyboard. SAM4s SPS-500 programming options
are not detailed in this manual. Follow the instructions on the screen, or refer to the SAM4s
SPS-500 Program Reference Manual for a complete description of your program options.
Note: If you did not Upload programs from the ECR, you will get a message "The file does
not exist" or a runtime error if you attempt to select any of these options.
Note: If you wish to create a program for a new store from an existing one, you can use the
"Copy a Store" function (see page 75) and then edit the copied program to suit your needs.
SAM500 Reference Manual V1.0
Edit ECR Data  21