Define Port Parameters - Sam4s SPS-500 Series Reference Manual

Define Port Parameters

Use the Serial Port Device Selections program to assign 'Polling" status to the appropriate
serial port.
1. Select DEFINE PORT from the S-MODE MENU.
2. Touch the port currently selected at the PORT # field to select the port you wish to view
or edit.
3. Touch the device currently selected at the DEVICE field to select POLLING.
4. Verify that the BAUD rate matches the SAM500 store setting (the highest recommended
setting is 57,600; 115,200 BAUD is available but not recommended), that parity is set to
'NONE', data bits is set to '8' and stop bits is set to '1'
5. Touch OK to save settings and return to the S-MODE MENU.
10  Introduction
SAM500 Reference Manual V1.0