Starting - Sam4s SPS-500 Series Reference Manual

Starting

Note: The software key must be installed on the USB port for SAM500 to access all of
the features of SAM500. Without the software key installed, only program save/load
features can be accessed.
1. Click the Start button, click Programs, click SAM500 and then click SAM500.exe.
2. The SAM500 main screen displays.
SAM500 Reference Manual V1.0
YOU MUST DO THIS FIRST!
Before you can attempt communications or editing, you must create at least one
store. Refer to "Creating a New Store" on page 16.
After creating a store, you must Receive (Upload) information from the ECR.
Refer to "Receive Programs from ECR (Upload)" on page 50.
Introduction  11