Ecr Setup; Print Density; Lcd Contrast For 16-Character Lcd; Lcd Contrast For Graphic Lcd - Sam4s NR-500 series Operating And Programming Manual

ECR Setup

Print Density

LCD Contrast for 16-Character LCD

LCD Contrast for Graphic LCD

100 • Service Mode Programming
1. From SERVICE MODE, press 6 and CASH for ECR SETUP screen
displays:
E CR S E TU P
1 .R O M I N F O
2 .P R I N T D E NS I T Y
3 .L C D CO N T RA S T
2. Press the ↑ key and the ↓ key for selecting value. Press CASH to confirm
the option value and return menu.
From ECR SETUP menu, press 2 and CASH to program 'PRINT DENSITY'
1.
screen:
PR I N T D E N SI T Y
( DE N S IT Y L EV E L : 1- 3 )
2. Press the ↑ key and the ↓ key for selecting value. Press CASH to confirm
the density level and return to the ECR SETUP menu.
From ECR SETUP menu, press 3 and CASH to program 'LCD
1.
CONSTRAST' screen:
2. Press 1 and CASH key for Customer Rear Display (Two Line).
3. During check Customer Rear Dipslay press the ↑ key and the ↓ key to
change constrast. Press CASH to confirm and return to the ECR SETUP menu.
From ECR SETUP menu, press 3 and CASH to program 'LCD
1.
CONSTRAST' screen:
2. Press 2 and CASH key for Operator Display (Multi Line).
3. During check Operator Display press the ↑ key and the ↓ key to change
constrast. Press CASH to confirm and return to the ECR SETUP menu.
2
SAM4S NR-500 Series Manual