Rs232C Port Programming - Sam4s NR-300 Series Operator's Manual

RS232C Port Programming

ect below menu , Enter CASH key
1. Sel
7. RS232C PORT
0.PORT
BAUDRATE:
NOTE) If you don't want to change or to select next option, Enter Only CASH key.
PARITY:
All options will be programmed as above steps.
DATA BIT:
STOP BIT:
DEVICE:
PRINTER:
KP START LINE :
(0–20)
NOTE : If you want to finish or exit the programming, Press "CLEAR" key.
84 •
SERVICE MODE
Select "7. RS232C PORT " by CASH key
RS232C PORT
9600
9600 →
NONE
NONE →
8BITS
8BITS →
1BIT
1BIT →
NONE
NONE →
NONE
NONE →
0
Select PORT1 or PORT 2 to program by CASH key..
Deafult Baud Rate is 9600 Bps.
If you want to change Baud Rate, Select Baud rate by
" ↑ " or " ↓ " key And enter CASH key.
Enter Line count , Enter CASH key
SAM4s NR-300 Series Operator's & Programming Manual v.1.0