Resetting The Number Of The Measured Value; Activating The Id Number - wtw photolab S12 Operating Instructions Manual

6. Documentation

6.1 Resetting the number of the measured value

6.2 Activating the ID number

If the I. D. number function is active, a sequence of up
to 6 alphanumeric characters (I. D. number) is allocated
to a measurement (e. g. sample location, customer
number, river kilometer).
– Call up the no. of meas. value submenu.
yes
The numbering of the measured values starts again
with 001 (default)
no
Consecutive numbering of the measured values
(from 001 to 999)
– Select the menu item with
1
– Confirm with .
– Call up the I. D. number submenu.
off
It is not possible to enter an ID number (default).
on
Input an ID number for each measured value.
– Select the menu item, on, with
1
– Confirm with .
3 28
or
3
17